RBI JE Recruitment 2021- 48 Posts, Eligibility, Selection Process, Educational Qualification and Full Notification. Reserve Bank of India invites online applications from eligible candidates for the posts of Junior Engineer (Civil/Electrical) in various office of the bank.
Candidates who are eligible and interested to apply and meets all educational and physical eligibility criteria can read the full notification before applying online or offline as the case may be and download admit card and results
Important Dates – RBI JE Recruitment 2021
|Recruiting Agency||Reserve Bank of India|
|Name of the Post||Junior Engineer (Civil/Electrical)|
|Start of Online Application||02-02-2021|
|Last Date of Online Application||15-02-2021|
|Last date of payment of fees||15-02-2021|
|Tentative Examination Date||08-03-2021|
Vacancy Details – RBI JE Recruitment 2021
Junior Engineer (Civil)
|Zone||SC||ST||OBC||EWS||Gen||Total||EXS II||PwD C|
Junior Engineer (Electrical)
|Zone||SC||ST||OBC||EWS||Gen||Total||EXS II||PwD C|
The PayScale for the RBI Junior Engineer is Rs. 13150–750(3)–15400–900(4)–19000–1200(6)–26200–1300(2)–28800–1480(3)–33240–1750(1)–34990 (20)
- DA, HRA, Conveyance Allowance and other allowances and perks are additional.
The initial Gross emoluments monthly for Junior Engineer (Civil/ Electrical) is Rs. 53,105/-(Approx.). Candidates with Graduate Engineering degree are eligible for two more advance increments.
Essential Qualification RBI JE Recruitment 2021
- The candidate must be a citizen of India.
Educational Qualification RBI JE Recruitment 2021
The required educational qualifications for the posts advertised are as follows:
|Post||Minimum Educational Qualifications|
|Junior Engineer (Civil)||A Diploma in Civil Engineering (Minimum three years) from a recognised Institute or University or Board with minimum 65% of marks (55% for SC/ST/PWD) |
A Degree in Civil Engineering from a recognised University with 55% marks (45% for SC/ST/PWD).
|Junior Engineer (Electrical)||A Diploma in Electrical or Electrical and Electronic Engineering (Minimum three years) from a recognized Institute or University or Board with minimum 65% of marks (55% for SC/ST/PWD) |
A Degree in Electrical or Electrical and Electronic Engineering from a recognized University with 55% marks (45% for SC/ST/PWD).
Experience RBI JE Recruitment 2021
|Junior Engineer (Civil)||Minimum 2 years’ experience for Diploma holders and minimum 1-year experience for Degree holders |
in execution and supervision of civil construction work and/or civil maintenance of office buildings/commercial buildings/ residential complexes with basic knowledge of RCC design and other civil works, working knowledge of computers, experience in preparation of tenders for civil works, etc.
|Junior Engineer (Electrical)||Minimum 2 years’ experience for Diploma holders and minimum 1-year experience for Degree holders |
in execution and supervision of electrical installations in large buildings/ commercial buildings having HT/LT substations, central AC plants, lifts, UPS, DG sets, CCTV, Fire alarm system, etc.
|Minimum Age as on 01-02-2021||Maximum Age as on 01-02-2021|
|20 Years||Less than 30 Years|
Age Relaxation for RBI JE Recruitment 2021
|Divyang + OBC||13 years|
|Divyang + SC/ST||15 years|
|Ex-Servicemen||To the extent of service rendered by them in Armed Forces plus an additional period of 3 years subject to a maximum of 50 years.|
|Widows/divorced women/ women judicially separated who are not re-married||10 Years|
|Candidates who had ordinarily been domiciled in Kashmir Division of the State of Jammu and Kashmir between 1-1-1980 and 31-12-1989.||5 Years|
The fees has to be paid through online mode only. Once paid the fee is non-refundable.
|General and OBC||Rs.450/- (Exam + Intimation Fees)|
|SC/ST/Divyang||Rs.50/- (Intimation fees only)|
How to Apply for RBI JE Recruitment 2021
Candidates interested for the posts may apply online Using the Official Website Link https://opportunities.rbi.org.in between 02.02.2021 to 15.02.2021.
- Candidates are first required to go to RBI website as mentioned above.
- Click on Current Vacancies > Vacancies
- Click on the option “Recruitment for the post of Junior Engineer (Civil / Electrical)” to open the On-Line Application Form.
- Click on New User & Register Yourself.
- Fill All the Required Details.
- Click on Final Submission.
- Take a Print out of Application.
Examination Pattern for RBI JE Recruitment 2021
Selection will be through Online Examination and Language Proficiency Test (LPT).
|Name of Tests (Objective)||No. of Questions||Maximum Marks (Total Weighted Score)|
|Engineering Discipline Paper I||40||100|
|Engineering Discipline Paper II||40||100|
|General Intelligence and Reasoning||50||50|
- The above tests except for the Test of English Language will be available bilingually, i.e. in English and Hindi.
- A candidate has to qualify in each part of the Objective test separately.
- There will be negative marks for wrong answers in the Objective tests.1/4th marks will be deducted for each wrong answer.
Syllabus for RBI JE Recruitment 2021
|Indicative Syllabus for Junior Engineer (Civil)||Paper I: Building materials, Estimating, Costing and Valuation, Surveying, Soil Mechanics, Hydraulics, Transportation Engineering, Environmental Engineering.|
(i) Building Materials: Physical and chemical properties, classification, standard tests, uses and manufacture/quarrying of materials e.g. building stones, silicate-based materials, cement (Portland), asbestos products, timber and wood-based products, laminates, bituminous materials, paints, varnishes.
(ii) Estimating. Costing and Valuation: estimate, glossary of technical terms, analysis of rates, methods and unit of measurement, item of works-earthwork, Brickwork (Modular & Traditional bricks), RCC work, shuttering. Timber work, Painting, flooring and plastering, Boundary wall, Brick building, Water tank, septic tank. Bar bending schedule, Centre line method. Mid-section formula. The trapezoidal formula, Simpson’s rule. Cost estimate of Septic tank, flexible pavements. Tube well, isolates and combined footings, Steel Truss, Piles and Piles caps. Valuation-value and cost, scrap value, salvage value, assessed value, sinking fund, depreciation and obsolescence, methods of valuation.
(iii) Surveying: Principles of surveying, measurement of distance, chain surveying, working of the prismatic compass, compass traversing, bearings, local attraction, plane table surveying, theodolite traversing, adjustment of the theodolite. Leveling, Definition of terms used in levelling, contouring, curvature and refraction corrections, temporary and permanent adjustments of dumpy level, methods of contouring, use of contour map, tachometric survey, curve setting, earthwork calculation, advanced surveying equipment.
(iv) Soil Mechanics: Origin of soil, phase diagram, Definitions-void ratio, porosity, degree of saturation, water content, specific gravity of soil grains, unit weights, density index and interrelationship of different parameters, Grain size distribution curves and their uses. Index properties of soils, Atterberg’s limits, ISI soil classification and plasticity chart. Permeability of soil, coefficient of permeability, determination of coefficient of permeability, Unconfined and confined aquifers, effective stress, quicksand, consolidation of soils. Principles of consolidation, degree of consolidation, pre-consolidation pressure normally consolidated soil, e-log p curve, computation of ultimate settlement. Shear strength of soils, direct shear test, Vane shear test, Triaxial test. Soil compaction, Laboratory compaction test, Maximum dry density and optimum moisture content, eartli pressure theories, active and passive earth pressures, Bearing capacity of soils, plate load test, standard penetration test.
(v) Hydraulics: Fluid properties, hydrostatics, measurements of flow, Bernoulli’s theorem and its application, flow through pipes, flow in open channels, weirs, flumes, spillways, pumps and turbines.
(v) Transportation Engineering: High Way Engineering-cross sectional elements, geometric design, types of pavements, pavement materials -aggregates and bitumen, different tests. Design of flexible and rigid pavements -Water Bound Macadam (WBM) and Wet Mix Macadam (WMM), Gravel Road, Bituminous construction. Rigid pavement joint, pavement maintenance. Highway drainage.
(vi) Environmental Engineering: Quality of water, source of water supply, purification of water, distribution of water, need of sanitation, sewerage systems, circular sewer, oval sewer, sewer appurtenances, sewage treatments. Surface water drainage. Solid waste management -types, effects, engineered management system. Air pollution pollutants, causes, effects, control. Noise pollution -cause, health effects, control.
Paper-II: Theory of structures. Concrete Technology, RCC design and Steel design
(i)Theory of structures: Elasticity constants, types of beams-determinate and indeterminate, bending moment and shear force diagrams of simply supported, cantilever and overhanging beams. Moment of area and moment of inertia for rectangular and circular sections, bending moment and shear stress for tee, channel and compound sections, chimneys, dams and retaining walls, eccentric loads, slope deflection of simply supported and cantilever beams, critical load and columns, Torsion of circular section.
(ii)Concrete Technology: Properties, Advantages and uses of concrete, cement aggregates, the importance of water quality, water-cement ratio, workability, mix design storage, batching, mixing, placement, compaction, finishing and curing of concrete, quality control of concrete, hot weather and cold weather concreting, repair and maintenance of concrete structures.
(iii) RCC Design: RCC beams-flexural strength, shear strength, bond strength, design of singly reinforced and double reinforced beams, cantilever beams. T-beams, lintels. One way and two-way slabs, isolated footings. Reinforced brick works, columns, staircases, retaining wall, water tanks (RCC design questions may be based on both Limit State and Working Stress methods).
(iv) Steel Design: Steel design and construction of steel columns, beams roof trusses plate girders.
|Indicative Syllabus for Junior Engineer (Electrical)||Paper-I|
Basics of Electrical Engineering
Lighting design of office areas
Transformers, Working principles, protection types, preventive maintenance
Various type of motors, various starting methods of various types of motors
Substation design and layout including DG set installations.
Type of earthing, testing, lightning arrestor, etc.
Basic ‘knowledge of’ air conditioning & refrigeration.
Inverters, rectifiers, UPS systems,
Energy conservation techniques
LT distribution system, cabling/ internal wiring system, panel design and faultfinding, preventive maintenance, etc.
Testing of electrical installation.
Basics of elevators, design, electrical safeties, protections controllers, etc.
Basics of CCTV system. Fire and Smoke Alarm system, UPS.
Knowledge of Indian Electricity Rules
Switchgears & protection used in HT/LT installations.
|Language Proficiency Test (LPT)||The candidates provisionally selected from the on-line examination will have to undergo a language proficiency test (LPT). The language proficiency test will be conducted in the Official / Local Language/s of the zone concerned. Candidate not proficient in the Official/Local Language/s would be disqualified.|
Important Links for RBI JE Recruitment 2021
|RBI GRADE B NOTIFICATION 2021 PDF DOWNLOAD (Active from 02-02-2021)|
|ONLINE APPLICATION (Active from 02-02-2021)|
What is the Selection Process for RBI Junior Engineer?
The selection process comprises of Online Examination and Language Proficiency Test (LPT).
What is the Examination Pattern for RBI Junior Engineer?
There will be Online Examination and Language Proficiency Test (LPT).
What is the Exam Syllabus for RBI Junior Engineer?
The syllabus for both Phase-I and Phase-II examinations are given above.
How can I Apply for RBI Junior Engineer Posts?
Candidates are first required to go to RBI website as mentioned above.
Click on Current Vacancies > Vacancies
Click on the option “Recruitment for the post of Junior Engineer (Civil / Electrical)” to open the On-Line Application Form.
Click on New User & Register Yourself.
Fill All the Required Details.
Click on Final Submission.
Take a Print out of Application.
What is the Educational Qualification for RBI Junior Engineer Posts?
Minimum three years Diploma in Civil/ Electrical Engineering from a recognised Institute or University or Board with minimum 65% of marks (55% for SC/ST/PWD) or Degree in Civil/ Electrical Engineering from a recognised University with 55% marks (45% for SC/ST/PWD).
What is the Age Limit of RBI Junior Engineer Recruitment?
Minimum 20 years and less than 30 years on 01-02-2021.
What is the last date of Online application for RBI Junior Engineer Recruitment?
What is the age relaxation for the RBI JE Recruitment 2021?
The age relaxation is as per rules. Details of the age relaxation are given here.